![]() ![]() First, confirm that the 3300 ELSD has the proper software versions installed by selecting “Maintenance/About” from theįront panel keypad. Ethernet Hub or Switch, ONLY if the system includes a 3300 ELSD with ChemStation-controlled Agilent instrumentation.Ī hub or switch is NOT required for a system that includes a 3300 ELSD with no other ChemStation-controlledġ.Piggyback the cabling of the 3300 ELSD directly to the Agilent instrumentation a hub or switch must be used instead. Then a crossover ethernet cable can be connected directly from the 3300 ELSD to the PC. If the system includes a 3300 ELSD without other ChemStation-controlled instrumentation, Make the following connections: from the 3300 ELSD to a hub/switch, from the Agilent system to a hub/switch, and from If the system includesĪ 3300 ELSD with ChemStation-controlled Agilent instrumentation, then standard ethernet cables should be used to The type of ethernet cable(s) required will depend on the system configuration. Selecting “ELSD Software Update”) by clicking here. Upgrade is required, it can be downloaded from the Grace Davison Discovery Sciences website (by To check theĬurrent software versions on the 3300 ELSD, select “Maintenance/About” on the front panel using the keypad. Alltech® 3300 ELSD with Application software version 1.0.20 or above and OS version 1.0.0 or above.Sciences website (by selecting “ELSD Software Update”) by clicking here. ![]() This software can be downloaded from the “3300 ELSD Driver forĪgilent ChemStation CD” (by clicking on “3300 ELSD ChemStation Driver”) or from the Grace Davison Discovery
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |